7020 power inductors document ae871-1 revised 01/10/13 1. when ordering, please specify testing code: ae513pya222ms z testing: z = cots h = screening per coilcraft cp-sa-10001 n = screening per coilcraft cp-sa-10004 2. inductance tested at 100 khz, 0.1 vrms using an agilent/hp 4192a. 3. dcr measured using a micro-ohmmeter. 4. srf measured using an agilent/hp 4395a or equivalent. 5. typical dc current at which the inductance drops 30% from its value without current. 6. typical current that causes the specifed temperature rise from 25c ambient. 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. inductance 2 dcr (mohms) 3 srf (mhz) 4 i sat 5 i rms (a) 6 part number 1 20% (h) typ max min typ (a) 20c rise 40c rise ae513pya151msz 0.15 1.9 2.5 129 161 46.0 13.5 18.0 ae513pya271msz 0.27 2.9 3.8 90 112 30.0 11.3 15.8 ae513pya331msz 0.33 4.0 5.2 70 88 28.0 10.5 15.0 AE513PYA471MSZ 0.47 5.3 6.4 59 72 24.3 9.0 12.8 ae513pya681msz 0.68 7.9 9.5 43 54 22.3 7.5 9.8 ae513pya102msz 1.0 9.8 10.8 37 46 16.4 6.0 8.3 ae513pya122msz 1.2 11.5 12.8 34 42 14.5 5.3 7.5 ae513pya152msz 1.5 16.7 18.6 30 37 11.7 4.5 6.8 ae513pya222msz 2.2 24.4 27.5 23 29 11.2 3.8 5.3 outgassing compliant power inductors ae513pya core material composite terminations tin-lead (63/37) over copper. weight 0.83 g ambient temperature C55c to +105c with i rms current, +105c to +155c with derated current storage temperature component: C55c to +155c. tape and reel packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) enhanced crush-resistant packaging 500 per 7 reel plastic tape: 16 mm wide, 0.30 mm thick, 12 mm pocket spacing, 2.2 mm pocket depth high temperature materials allow operation in ambient temperatures up to 155c passes nasa low outgassing specifcations passes vibration testing to 80 g and shock testing to 1000 g tin-lead (sn-pb) termination for the best possible board adhesion high current and very low dcr soft saturation makes them ideal for vrm/vrd applications. i rms testing i rms testing was performed on a 0.060 thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. therefore temperature rise should be verifed in application conditions. ? ? coilcraft, inc. 2013 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
ae513pya series (7020) 7020 power inductors document ae871-2 revised 01/10/13 l vs current 1 0 0 0.5 1.0 1.5 3.0 2.0 2.5 2 3 4 5 6 7 8 91 01 11 21 31 4 15 current (a) inductance (h) 2 0 0 0.4 0.8 2.0 1.2 1.6 4 6 8 10 12 14 16 18 20 inductance (h) 2 0 0 0.2 0.6 0.4 0.8 1.4 1.0 1.2 4 6 8 10 12 14 16 18 20 current (a) inductance (h) 2 0 0 0.2 0.6 0.4 0.8 1.4 1.0 1.2 4 6 8 10 12 14 16 18 20 current (a) inductance (h) 5 0 0 0.1 0.2 0.3 0.4 10 15 20 25 35 30 45 40 current (a) inductance (h) 5 0 0 0.05 0.10 0.15 0.20 10 15 20 25 35 40 45 50 55 30 60 current (a) inductance (h) 0.15 h 1.0 h 1.2 h 1.5 h 2.2 h 0.27 h 3 0 0 0.1 0.2 0.3 0.6 0.4 0.5 6 9 12 15 18 21 24 27 30 current (a) inductance (h) 3 0 0 0.2 0.4 1.0 0.6 0.8 6 9 12 15 18 21 24 27 30 current (a) inductance (h) 5 0 0 0.1 0.2 0.5 0.3 0.4 10 15 20 25 30 35 current (a) inductance (h) current (a) 0.47 h 0.68 h 0.33 h ? ? coilcraft, inc. 2013 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
ae513pya series (7020) 7020 power inductors document ae871-3 revised 01/10/13 irms derating l vs frequency dimensions are in inches mm -40 -55 -20 02 04 06 08 0 100 160 140 120 ambient temperature (c) pe r cent of rated rms i 120 110 100 90 80 70 60 50 40 30 20 10 0 25c 0.295 0.020 7,5 0,5 0.295 0.020 7,5 0,5 0.079 2,0 max a ( see table) b ( see table) 0.063 0.004 1,60 0,10 0.123 3,12 0.010 0,25 0.07 1,78 0.186 4,72 su gge st ed la nd pa tte rn a da sh b nu mb er (in / mm) (in / mm) 0.008 in 0,20 mm -151 0.249 / 6.32 0.257 / 6.52 -271 -681 0.241 / 6.12 0.245 / 6.22 -102 -152 0.239 / 6.08 0.242 / 6.16 -222 0.238 / 6.04 0.240 / 6.10 0.249 / 6.32 0.257 / 6.52 -331 0.245 / 6.22 0.251 / 6.37 -471 0.245 / 6.22 0.251 / 6.37 0.241 / 6.12 0.245 / 6.22 -122 0.241 / 6.12 0.245 / 6.22 * * maximum height for -151 and -271 is 0.081 in / 2,05 mm . ? ? coilcraft, inc. 2013 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
|
